Accredited Testing & Expert Bodies

DMT Measuring Centre for Measurements at Workplaces

Accredited by the German Accreditation System (DAkkS) to DIN EN ISO/IEC 17025:2005
Recognised measuring centre for the recording and assessment of hazards in the workplace in accordance with the German Ordinance on Hazardous Substances.

DMT Testing Laboratory for Fire Protection

Accredited by the German Accreditation System (DAkkS) for Testing according to DIN EN ISO/IEC 17025:2005
Accredited laboratory for testing the fire resistance and burning behaviour of building materials, appliances, vehicles and systems.

DMT Testing Laboratory for Non-destructive and Destructive Testing – Rope Testing Centre

Testing laboratory for the non-destructive and destructive testing of both metal based and non-metal products and components.

Testing Body for Biological Safety

Accredited by DGA according to § 15.4 of the Drinking Water Ordinance (State Agency for Nature, Environment and Consumer Protection)
Accredited testing body for the microbiological, chemical and physical examination of water, air and surface samples.

Testing Body for Refrigerating, Heating & Air Conditioning Engineering

Accredited by the German Accreditation System (DAkkS) for Testing according to DIN EN ISO/IEC 17025:2005
Accredited testing body for the performance of normative and non-normative measurements on refrigerating and heating machines and components.

We perform normative and non-normative performance measurements on refrigerating and heating machines and components for manufacturers and operators and act as an independent testing laboratory for EUROVENT-CERTIFICATION, Paris, in a number of certification programmes. Testing is based on standards such as EN 14511, EN 13053, EN1216 and EN 1048.

We test the following either using our own test facilities or at other test sites:

  • Refrigerating machines
  • Heat pumps
  • Air coolers
  • Liquefiers
  • Recooling plants
  • Heat exchangers working with air / liquid and liquid / liquid
  • Air conditioning plants
  • Cooling towers
  • Other air conditioning equipment that function with air, water or refrigerants.

The performance ranges measured depend on the equipment being tested. Power ratings anywhere between 5 and 2500 kW can be investigated with water temperatures from 2 to 75 °C at flow volumes of up to 500 m3/h. When brine is used the temperature of the liquid can even drop below zero.

Air flows with a maximum humidification of 1000 kg/h can be worked with at temperatures between -10 and 60 °C. The maximum air flow is 60 m³/sec

Concrete Testing Centre

Testing centre for concrete and prefabricated concrete components in accordance with current standards and regulations, approved by the Landesbauordnung (German Building Regulation Authorities).

Expert Body for Urban Development in Mining Areas

Expert body for consultation, expert reports and site managment for construction and infrastructure projects in mining areas, approved by the mining authorities.

Expert Body for Fire Protection

Expert body for consultation and expert reports on preventative and defensive fire protection measures and the investigation of fire damage and fire incidents with special circumstances, approved by the mining authorities.

Expert Body for Ground Movement

The DMT Expert Body for Ground Movement provides extensive services for measuring, forecasting and evaluating ground motion, executed by its own publicly appointed experts. The expert body operates monitoring networks worldwide and acts as an independent expert witness for authorities, private individuals and customers from industries such as mining and tunnel building, civil engineering and infrastructure.

Its specialist applications include subsidence and deformation forecasting, terrestrial and satellite based radar-interferometry measurements, state of the art tachymeter monitoring techniques, 3D laser scanning and high-precision GNSS measurements – also for offshore projects and areas prone to explosion hazards. Furthermore, the expert body provides high-end solutions for all kinds of geodetic and geomonitoring work using its own specially designed monitoring software DMT SAFEGUARD. 

It is the job of the body's experienced expert witnesses to get to the bottom of what are often very complex causes of ground movement, in order to determine and subsequently minimise any resulting risk to people or property. Their combined expertise ranges from the fields of surveying, mining, civil engineering, applied geology, hydrology, site remediation and construction engineering.

Our services

  • Consultation, expert witness reports and statements, research
  • Planning, execution and evaluation of complex geodetic and geotechnical surveys for monitoring the earth's surface, slopes and hillsides or buildings, in the construction and civil engineering and mining industries.
  • The latest industrial measuring technology in the fields of GNSS, total station, laser scanning, radar interferometry and geotechnical sensors – above or underground, on or offshore.
  • Earth and rock movement forecasts for the mining, oil & gas and caverning industries – subsidence and deformation modellling using reputable techniques.
  • Expert reports on mining-related damage and analysis of the effects ground movement has at the surface, on streets and buildings, pipelines and water balance.
  • Creation of customer-specific geo-databases and GIS applications – also internet based.
  • We set up complex monitoring systems with warning functions based on our in-house software DMT SAFEGUARD for real-time transmission, evaluation, online accessibility and long-term archiving of monitoring data.

Your benefits

  • Our expert assessments and professional advice offer you the highest level of security for your projects and significantly reduce potential risks and dangers.
  • Our expert witnesses are officially appointed and sworn in by public bodies and can therefore support you in dealing with official regulations.
  • Our tried and tested measuring systems offer you reliable operation with only minimal disruption to your workflow. Support is always provided by competent professionals, ensuring the highest quality.
  • Our GIS and Internet information systems enable you permanent access to all relevant data. Our experts are glad to assist you with the interpretation and evaluation of your data.
  • By preventing risks, minimising remediation costs and by providing comprehensive solutions from a single source, we help you cut your costs.

Expert Body for Rock Burst Prevention

Expert body for the assessment of rock burst hazards and advice on averting dangers, approved by the mining authorities.

Expert Body for Hazardous Substances in Mining

Expert body for the measurement and testing of hazardous substances in terms of their potential risk to the environment and in the workplace.

Expert Body for Rock Mechanics & Support Systems

Expert body for planning, testing and monitoring in the field of rock mechanics and support systems, approved by the mining authorities.

Expert Body for Injection and Building Materials Technology

Expert body for testing, assessing and certifying injection processes and building materials

Expert Body for Cokemaking Technology

Expert body for the testing and assessment of technology in cokemaking plants, approved by the mining authorities.

Expert Body for Machine Safety

Expert body for the testing and assessment of mining machinery and plants, approved by the mining authorities.

Expert Body for Vibration Measurements (Plants and Machinery)

Expert body for testing and assessing the vibration behaviour of underground ventilators, approved by the mining authorities.

Expert Body for Safety – Test Centre for Mine Ventilation

Expert body for testing and assessing ventilation and air conditioning systems above and under ground, approved by the mining authorities.

Expert Body for Safety – Rope Testing Centre

Expert body for testing and assessing facilities for shaft and underground haulage systems according to regulations by the supervisory authority.

Expert Body for Dust Suppression

Expert body for testing, expert reports and consultation on dust suppression and dust prevention measures.

Expert Body for Air Pollution Control

Recognised expert body for emission and immission measurement and the assessment of air pollutants.

Expert Body for Vibration Measurements (Buildings)

Recognised expert body for measurement and assessment of vibrations.

Laboratory for Air Hygiene

Accredited by the German Accreditation System (DAkkS) to DIN EN ISO/IEC 17025:2005
Recognised testing body for the assessment and prevention of air contamination and its causes. 

The field of air hygiene focuses on the identification and avoidance of air pollution and its causes. The DMT laboratory for air hygiene has many years of experience particularly in determining sources of air contamination in indoor areas as well as in planning measures to prevent and/or reduce such contamination. The tests on air hygiene and air conditioning hygiene examine household appliances for air purification and air conditioning, dust separation and reduction of allergens and germs.
The colleagues in the Technical Hygiene Department inspect air conditioning systems.

Our services:

Product tests on air hygiene characteristics
We examine vacuum cleaners, room air cleaners, air humidifiers and laser printers for their separation efficiency with respect to fine dust, gases, germs (fungi and bacteria), allergens and the emissions of these pollutants.
These tests are conducted within the framework of the Air Hygiene Working Group, which includes TÜV NORD Systems GmbH & Co. KG and other competent partners within TÜV NORD GROUP. This framework for testing products regarding their suitability for people with allergies also encompasses tests on mattress covers and carpets.
Standard testing is carried out in accordance with IEC 60312 (for vacuum cleaners), VDI 6032 (for vehicle ventilation), VDI 6033 (for products designed for allergic persons) and ANSI/AHAM AC-1-2006 (for indoor air cleaners) as well as special tests according to methods developed in-house.
Emission chamber measurements are conducted in accordance with DIN EN ISO 16000-9 and ASTM D 6670-01 or also according to in-company methods (e.g. for wall paints, building materials and other materials relevant for indoor areas).
At the request of the customer DMT issues certificates for tested products whose characteristics meet a high level of indoor air hygiene quality.